Publicidad
Idiomas disponibles
Idiomas disponibles
Changing or cancelling the time
Selecting the hotplate . Press the
cooking time with the + or - symbols, or set to
Once the time has elapsed
The hotplate switches off. A beep sounds and in the time
program function display
‹‹
The
indicator on the hotplate lights up. Pressing the
Ú
symbol turns off the indicators and stops the beeping.
Notes
If cooking times have been programmed for various
■
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
■
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
The timer can be selected in two different ways:
1.
If you have selected the hotplate: press the
■
twice.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
heat indicator
/
flash alternately in the display.
œ
•
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
Childproof lock
™‚
Deactivated.*
‹
‚
Activated.
Audible signals
™ƒ
Confirmation and error signals deactivated.
‹
Only error signal activated.
‚
ƒ
Only confirmation signal activated.
All signals activated.*
„
™†
Automatic programming of cooking time.
Switched off.*
‹
-
Automatic shut-off time.
‚
ŠŠ
Duration of the time program function warning signal
™‡
10 seconds*.
‚
ƒ
30 seconds.
1 minute.
„
*Factory settings
symbol and change the
3
.
‹‹
appears for 10 seconds.
3
symbol
3
,
symbol and the residual
"
‰
If you have not selected the hotplate: press the
■
The
Ú
indicator next to the
displayed on the time program function display.
Press the + or - symbol. The basic setting appears.
2.
+ symbol: 10 minutes.
- symbol: 5 minutes.
Set the desired time using the + or - symbols.
3.
After a few seconds, the time will start to elapse.
Changing or cancelling the time
Press the
3
symbol various times until the
the
symbol lights up. Change the time or set to
W
the + or - symbols.
Once the time has elapsed
A warning signal sounds.
function display. After 10 seconds the indicators turn off.
Pressing the
symbol turns off the indicators and stops the
3
beeping.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
W
symbol lights up.
‹‹
Ú
indicator next to
‹‹
‹‹
is displayed on the time program
symbol.
3
is
with
23
Publicidad
