Icom IC-A22 Manual De Instrucciones página 17

i Memory channel selection
The transceiver has 50 memory channels for storage of
often-used frequencies along with 6-character notes.
@ Push [MR] to select memory mode.
@ Select the desired memory channel.
Using the tuning dial:
Rotate the tuning dial to select the desired memory
channel.
* Only programmed memory channels appear.
Using the keypa
Push 2 appropriate digit keys (01-50) to select the
desired memory channel.
* To select memory channels 1-9, push (1}{9] then [ENT]; or,
push [0] then [1}{9}.
Using the A/W keys:
Push [A] or ['W] to change the memory channel.
* Pushing [A] or [W] changes the memory channel contin-
uously.
@ When a comment appears, push [MR] to display the
programmed frequency, if desired.
@ To return to frequency mode, push [CLR].
Y Comments appear first when programmed, however, the
transceiver can be programmed to show the operating
frequency first by your dealer. Push [MR] to display the
7, comment in this case. KD. LOO
Pers vba
MEMORY OPERATION 4 El
li Transferring memory
contents
This function transfers a memory channel's contents into
the frequency mode. This is useful when searching for
signals around a memory channel's frequency.
then
Frequency mode
@ Push [MR] to select memory mode.
* °M" appears,
@ Select the desired memory channel to be transferred
using the tuning dial or keypad.
@ Push [F] then [MR-MW].
*"M" disappears as frequency mode is automatically selected
and the memory contents are transferred,