Publicidad
IRONING
Important: Have you read the section" Important Safeguards"?
Voltage selection
The iron has a selection of two kinds of voltage 115 v / 800 w and 230 v / 800 w
Change the voltage needed a keyword tools, Specific operation as shown in the figure below
115V
CHOICE OF WATER
This iron can be used with normal tap water.
If the water in your area is particularly hard, it is advisable to use distilled or
demineralized water.
Do not use chemically descaled water or any other liquids for refilling.
HOW TO FILL IN WATER
Set the steam control knob(3) to "0" and the temperature control dial(6) to "OFF".
Unplug the iron from the wall outlet, and wait for the iron to cool down.
Pour water into the water inlet (2):
-Fill up to the maximum level "MAX" of the water tank.
TEMPERATURE CONTROL SETTING
Always check garment label for ironing instructions before ironing garment.
If the ironing instructions are missing, then the table below may help you.
First you should sort the laundry: Wool with wool, Cotton with cotton etc. Start
ironing the fabrics requiring the lowest temperature and progress to the higher ones
because the iron heats up quicker than it cools down.
If the fabric consist of various kinds of fibres (e.g. cotton with polyester ) you must
always select the ironing temperature for the material with the lowest advised
temperature.
230V
Toggle switch voltage to 230 v power supply
connected to the voltage of 230 v, toggle switch
to another section is 115 v.Please according to the
national voltage selection.
Publicidad
