Quick Reference Guide - Ecler EDRIVE 600 Manual De Instrucciones

3. QUICK REFERENCE GUIDE

Display
The LCD displays preset and parameter information. The default screen is shown after start up
and displays the number and name of the current preset on the lower line of
around the adjustable parameters, other information is shown.
Channel select buttons
The currently selected input or output channel is shown in the top left corner of the
Pressing the channel select buttons scrolls through the available inputs and outputs. If operating stereo
linked the channel pair is shown. For example 'CH A+B' means both input A and B parameters.
Edit Select buttons
The name of the edit parameter page is displayed in the bottom left portion of the LCD. Pressing
the edit select buttons moves through the available parameter pages for the current input or output.
Parameter knobs
Up to three parameters are shown on the display. The parameter name is shown with its' current
value below. Where appropriate, parameters are grouped according to function. For example the
parametric equalisation page shows centre frequency, width and gain. Turning a parameter knob
clockwise will increase the value of a parameter, tu rning anti-clockwise will decrease it. Turning a knob
rapidly will cause the action to 'accelerate', so the value changes more rapidly.
Mute buttons
The LEDs next to the mute buttons indicate their current status. Pressing a mute button toggles
between the mute on and off.
Store button
The unit has 45 preset locations. To store a preset in a location, press the store button and use
the parameter knobs to select the preset location and name the preset. Pressing the store button again
completes the task. Pressing any button other than store during the process cancels the procedure.
Recall button
To recall a preset, press the recall button and
preset. Pressing the recall button again will activate the preset. You will then be asked to confirm by
pressing recall once more. As with the store function, pressing any button other will cancel the process.
6
use parameter knob A to select the required
text. When navigating
display.