3.1.3.
Control panel – the same for all models:
SELECT MODE – machine operating mode selection:
SALTY POPS – higher operating temperature suitable for salty popcorn
•
•
SWEET POPS – lower operating temperature suitable for sweet popcorn
HEAT & TURN – turning on the stirrer and heating in the pot
LIGHT & KEEP WARM – turn on the lighting and heating of the popcorn making chamber
3.2.
Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
Disassemble the device and all its components and clean them before the first use.