Powersmart DB2603 Manual Del Usuario página 128

TO INSTALL BATTERY PACK (See Figure 4)
•
Lift and hold up the battery door.
•
Place the battery pack on the mower. Align guided ribs on battery pack with grooves
in the product's battery port.
•
Make sure the latch on bottom of the battery pack snaps in place and that battery
pack is fully seated and secure in the product before beginning operation.
•
Insert the safety key.
•
If the machine is not going to be used immediately, do not insert the safety key.
•
Close the door.
Battery pack
Figure 4
TO REMOVE BATTERY PACK (See Figure 4)
•
Release the power lever to stop the product.
•
Remove the safety key.
•
Press and hold the battery latch button at the bottom of the battery pack.
•
Remove battery pack from the product.
Battery door
Safety
key
16