Powersmart DB2603 Manual Del Usuario página 17

To replace the spool:
1. Replace the spool (1) with a new pre-wound spool.
2. Insert the end of line through the opening (4) in the spool housing (3).
3. Align the tabs on the spool cover with the slots in the spool housing on the trimmer head.
4. Push down on the spool cover locking it to the spool housing.
5. To advance the line when initially installed, you must pull the line while pressing the black line release
button on the side of the spool housing (3).
MAINTENANCE
WARNING:In order to avoid personal injury and the risk of fire and electric shock, remove the
battery pack before adjusting, inspecting, or cleaning the string trimmer.
WARNING:When servicing, use only identical replacement parts. Use of any other parts could
create a hazard or cause product damage.
CLEANING
Remove the battery pack.
Stop the motor and remove the battery pack.

Clean dirt and debris from the spool head using a damp cloth with a mild detergent.

NOTE: Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic components. Certain household cleaners may cause damage,
and may cause a shock hazard.
GENERAL INSPECTION
Regularly check that all the fixing screws are tight. They may vibrate loose over time.
STORAGE
Store the trimmer away from direct sunlight.

Do not store in a nylon bag as this can encourage the formation of mold.

Store it in a well-ventilated place that is inaccessible to children.

Keep away from corrosive agents such as garden chemicals and deicing salts.

At the end of the season, give the trimmer an overall cleaning and a thorough check.

BATTERY PACK
Store the battery pack fully charged.

Once the charging light turns green, remove the battery from the charger and disconnect the charger from

the outlet.
Do not store the battery pack on the tool.

After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.

17