Powersmart DB2603 Manual De Instrucciones página 14

CONNECTING AND REMOVING BATTERY
IMPORTANT! The battery pack is not charged when it is purchased. Before using the power tool for the
first time, place the battery pack in the battery charger and charge. Make sure to read all safety precautions,
and follow the instructions in the battery charger section.
To install the battery pack
To install the battery pack into the bottom of the handle, align the rails of the battery pack with the rails in the
handle and push the battery into the handle. To connect the battery, slide the battery pack fully forward. Until
the latch locks into place.
To remove the battery pack
Press the battery release button ,Slide the battery pack backward, and then pull or lift the battery out of the
tool.
WARNING:
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire:
•
Replace the battery pack or the charger immediately if the battery case or charger cord is
damaged.
14