Publicidad
Idiomas disponibles
Idiomas disponibles
AND ADJUSTMENTS
TO ADJUST HANDLE (See Figs. 13 Thru 15)
Your lawn mower handle can be raised or lowered for your
mowing comforL
Four (4) positions are available: high,
medium high, medium tow and low. Handles are shipped
mounted in the medium low position.
•
To change from medium low to medium high position,
the upper and lower handle sections will have to be
turned over (See Fig. t3B)o
•
Remove the controls and operator presence control
bar from the upper handle.
o
Remove the starter rope guide from the lower handle,
.
Remove hairpin cotters_
=
Disconnect the lower handle from the handle brackets
(See Fig_ 15).
•
Turn the handle over and reassemble the hairpin
cotters that have been removed.
•
Reassemble the starter rope guide
°
Reassemble the controls and the operator presence
control bar to the upper handle,
CAUTION: The operator presence con-
_
trol bar must pivot freely to permit blade
brake engagement when control bar is
released° Do not overtighten the fas-
teners holding the controls to the up-
per handle.
•
To change from medium low to high position only the
upper handle section will have to be turned over (See
Fig. I4A).
°
To change from medium low to low position, only the
lower handle section will have to be turned over (See
Fig, 14B),
SHIPPING POSITION
MEDIUM LOW
MEDIUM HIGH
FIG. 13A
FIG. 13B
LOW
FIG. 14A
FIG. 14B
LOWER HANDLE
SQUEEZE
TO REMOVE
HAIRPIN COTTER
HANDLE BRACKET
FIG. 15
13
Publicidad
