Kenmore 116.31079 Manual Del Propietário página 5

Beforeassembling v acuum, c heckthe
PACKING LISTonthe coverof the separate
RepairPartsList.Usethis listto verifythat
you havereceivedallthe components o f
your newKenmore vacuum.
• wA. N N G
Electrical Shock Hazard
Do not plug into the electrical sup-
ply until the assembly is complete.
Failure to do so could result in elec-
trical shock or injury.
HANDLE ASSEMBLY
Cord
Hooks q
Back of
Vacuum
Screw
and Hole
Handle
Screw
Back Of
Vacuum Cleaner
Remove the handle screw located just
below the top edge of the back of the vacu-
umo See illustration above,
Position the handle so the cord hooks are
toward the back of the cteaner_
Insert the
---Screw Hole
handle into _ In
Handle
the open-
\\_i-__Screw Hole
ing at
the \ill)lL In Vacuum
top of the
vacuum°
Align the handle screw in the hole in the
handle and the handle screw hole in the
back of the vacuum,
Insert the handle screw so it passes
through the back of the vacuum into the
handle.
Begin to tighten the screw with your fingers..
It may be necessary to adjust the handle
slightly.
5