Publicidad
Idiomas disponibles
Idiomas disponibles
14
INSTALLATION
INSTRUCTIONS
Connecting
the
water
lines
Check the rubber
seals on both sides
of the hose
- Insert
a rubber
seal into the threaded
fittings
on each
hose to prevent
leaking
Rubber
seal
_--_
_
Rubb
.....
I
4
Connect
the hoses to the water
inlets
tightly
by hand and
then
tighten
another
2/3 turn with
pliers.
- Connect
the blue hose to the cold water
inlet and the red
hose to the hot water
inlet
__
Water
hose
(To water
inlet
on
the
washing
machine)
hose
I
(To faucet)
Connect
the water
supply
hoses to the HOT and COLD
water faucets
tightly
by hand and then tighten
another
2/3
turn with pliers.
- Connect
the blue hose to a cold water
faucet
and the red
hose to a hot water
faucet
_A WARNING
...............................................................................................................................
" Do not
Damage
to the coupling
result.
overtighten,
can
3
After
connecting
inlet hose to water faucets,
turn on the
water faucets
to flush
out foreign
substances
(dirt, sand or
sawdust)
in the water
lines
Let water
drain into a bucket,
and check the water
temperature
, A WARNING
....................................................
Do not overtighten
the hoses.
Overtightening
can
damage
the valves
resulting
in leaking and property
,
damage
5
Check for leaks by turning
on the faucets
- If water
leaks, check
steps 1 to 4 again
r@ NOTE ...............................................................
For your safety,
and for extended
product
life, use
only authorized
components
The manufacturer
is not
responsible
for product
malfunction
or accidents
caused
by the use of separately
purchased
unauthorized
parts
Use new hoses
when you install the washing
machine.
De not reuse
old hoses
Use only the inlet hoses
provided
with the washer
LG does not recommend
the
use of aftermarket
hoses.
Periodically
check
the hoses for cracks, leaks and wear,
and replace
the hoses
every 5 years.
De not stretch
the water
hoses
intentionally,
and make
sure that they are not crushed
by other objects.
Water
supply
pressure
must be between
14.5 PSI and
116 PSI (100~800
kPa)
If the water
supply
pressure
is
more than
116 PSI, a pressure
reducing
valve
must be
installed
• To provide
optimum
washing
performance
the hot water
temperature
should
be set at 120-135°F
(48-57°C)
and
the cold at 60°F (15°C).
Publicidad
