Descargar Imprimir esta página

Genius INVICTUS X7 Instrucciones De Uso página 31

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 75
Filter cannot be
inserted correctly
INVICTUS X7
Display indicators
flashes red
Both indicators flashing
NOTE!
If the fault cannot be rectified, please contact our customer service. Never open up the appliance!
Disposal
(Applicable in the European Union and other European states with systems for the separate collection of waste and
recyclables).
Packaging
The packaging material can be recycled. Dispose of the packaging in an environmentally friendly way for recycling.
Electrical appliances
The symbol with the crossed out dustbin means that this product cannot be disposed of in the household
waste. Electrical waste should be taken to a local acceptance point.
You can obtain further information about the disposal and recycling of this appliance from your municipal
utility company, the retailer where you purchased it or the manufacturer.
Before disposing of the appliance remove the batteries because they have to be disposed of separately. To
protect the environment, batteries and rechargeable batteries must not be disposed of alongside normal
household waste, regardless of whether they contain harmful substances* or not, and should instead be
taken to the relevant collection point. Contact your local authority to find out where you can dispose of
batteries in your area.
Even empty batteries have a residual charge. Before you dispose of them, cover the poles with insulating
tape to prevent them short circuiting, which could cause fire or an explosion.
*marked with: Cd = Cadmium, Hg = Mercury, Pb = Lead
Instruction manual
Filter not fitting properly in slot
Cause
Incorrect mains adaptor
Brush roller not inserted
correctly/blocked
Suction blocked
Air flow blocked
Filter blocked
Appliance is overheating
Check filter and fitting are correct
Solution
Only use the original mains adaptor or a mains adaptor
with identical specifications
Check that the brush roller is correctly fitted and
remove any blockages/dirt
Check the brush rollers, suction tube and suction
opening for dirt/blockages
Clean the filter
Leave to cool down
GB
31

Publicidad

loading