Buffalo CJ558 Manual De Instrucciones página 5

Cleaning, Care & Maintenance
Warning:
Always turn off and disconnect the appliance from the power supply before
cleaning.
Always allow the appliance to cool before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• For stains on the interior walls, wipe with a cloth damped with some mild soapy solution. Ensure no
moisture enters the inside of the cabinet.
• Always wipe dry after cleaning.
Cleaning the wire racks
• After use, remove the wire racks from the appliance for cleaning.
• Clean using warm, soapy water. Rinse thoroughly and dry well.
• Re-locate into the appliance.
Water tray
• Periodically remove the water tray and empty.
• Re-locate into the appliance.
WARNING: DO NOT remove the tray during or immediately after use as it is still
hot.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
Appliance not The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Appliance heats up Indicator light is faulty
but indicator light
does not come on
Unit not heating up Incorrect operation
or heats up slowly
and the indicator
light is On
Thermostat failure
Element failure
CJ558-CJ559_ML_A5_v1 20230425.indb 5 CJ558-CJ559_ML_A5_v1 20230425.indb 5
Probable Cause
Check the unit is plugged in correctly and switched
on
Replace Plug or lead
Replace the fuse
Check mains power supply
Consult a qualified Technician
Ensure:
•
•
•
Consult a qualified Technician
Consult a qualified Technician
Solution
thermostat has been set correctly
doors are closed
thermostat sensor bulb has not been removed
or damaged
EN
5
2023/4/25 17:07 2023/4/25 17:07