FUXTEC FX-LBP165T Manual De Instrucciones Original página 41

•
if it has a damaged insulation body
•
in case of heavy burn-up of the electrodes
•
for very dirty or oily electrodes
•
every month in regular operation
Use one of the following spark plugs:
Torch BMR6A
Check ignition sparks
1. Remove the spark plug connector from the spark plug
2. Unscrew the spark plug with the spark plug wrench provided.
3. Insert the spark plug connector firmly.
4. Press the spark plug against the engine casing (not near the spark plug hole) with insulated
pliers.
Slide the on / off switch to the "start" position.
6. Pull strongly the starting rope at the starting handle.
A spark must be visible between the electrodes if the system is functioning properly.
Muffler/outlet opening
Do not tighten the muffler screws when the engine is hot.
1. Check regularly that the screws (D) of the muffler have not become loose ➜ If they are loose,
hand-tighten them.
2. Regularly clean the outlet opening (E).
Original user manual FX-LBP165T_de_en_fr_ita_es_rev01
41