Konig & Meyer 29670 Instrucciones De Montaje página 6

Technical data
Wall mounting plate, swivel bracket, boom:
steel, powder coated black/white
Material Screw, washer and nut: steel, galvanized
Cover, adjusting screw, protective caps, square hole washer:
plastic, black/white
Load capacity 25 kg
Wall mounting plate: 160 x 90 x 5 mm
Dimensions
W x D x H: 95 x 287 x 192 mm, boom horizontal
and
W x D x H: 95 x 268 x 250 mm, boom -30°
adjustment
Tilt: 0° to -30° stepless adjustment
range
Swivel: 90°
Packaging 310 x 220 x 145 mm
Weight 1.6 kg/mount
Mounting
!There is a risk of crushing between the components due to the adjustment option!
!Due to the position of the speaker there is a risk of falling parts!
To assemble and install the speaker wall mount, proceed as follows:
1.) Unpack and check product for damage and completeness
2.) Installing the speaker wall mount on the wall
1 2x speaker wall mount with cover
2 Accessory bag:
2 2x Protective cap M6
2 2x Hexagon screw M6 x 22 mm
2 2x Washer ø 6,4 x 17,8 mm
2 2x Adjusting screw M8 x 49 mm
2x Nut M8
2
2 1x Wrench SW10/SW13
All four holes of the wall bracket must be used for
mounting. A suitable fastener must be selected
according to the wall condition.
Align the wall bracket on the wall and mark the four
mounting holes on it. Make holes to match the selec-
ted fastener and screw the wall holder firmly to the
wall