Power Supply; Rating Plate - Caso BS 1 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 51

4.6 Power supply

To replace the batteries, take out one in the middle from the negative pole
to the others.
Please note that the incorrect polarity will cause the permanent damage to
the electronic parts.

5 Rating plate

The rating plate with the performance data can be founded on the back of
the device
6 Operation
This chapter provides important information on operating the device.
Follow the instructions in order to avoid danger and damage.
6.1 Setting up the device
Please place the scale on flat and solid ground.
6.2 Selection of the weight and size units
Open the battery box cover and press the small button to interchange the
unit between kg and lb.
► Before weighing, select the weight unit. During use, it is not possible to
change between the units.
6.3 Switch on
Step on the scale and the display lights up.
6.4 Switch off
The scale switches off automatically after about 8 seconds.
caso Personenwaage BS 1
Turn around the scales; battery compartment is
on the back of the scales.
Insert the batteries
Pull the battery cover in the arrow direction
Install 4 x 1.5 AA batteries as shown.
After installing the batteries, put back the
battery cover and push the cover back.
Please note
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3412

Tabla de contenido