Hitachi CSNET MANAGER XT Manual De Instrucciones página 8

Installation
3 INSTALLATION
C A U T I O N
• Disregarding the safety and assembly instructions may result in the falling of and / or damage to your electrical appliance. Opening
the package represents your undertaking to closely read and follow the instructions. This mount is not intended for use in public
places.
• This mount is intended for use only with HITACHI CSNET Manager LT/XT.
• Never install CSNET Manager in horizontal position neither cover the ventilation holes located in the bottom and top of device. It
may damage the device due to lack of ventilation.
N O T E
It is normal that the CSNET Manager LT/XT reaches high temperature.
3.1 HC-A64NET
Please refer to the Installation and operation manual of the HC-A64NET.
3.2 CSNET MANAGER
CSNET Manager has standard VESA mounting dimensions commonly available in the market. However, Hitachi offers these 2
accessories for the CSNET Manager (LT/XT) assembly:
Stand mounted support (Optional)
N O T E
The item may differ from the image shown.
3.2.1 Wall Mounted (Optional)
C A U T I O N
• This device cannot built in neither installed without providing ventilation to the aluminium sink behind
• Place the support on a resistant wall.
CSNET Manager can be wall mounted by using any standard VESA 75 mm wall mounted support for LT & XT and VESA 100 mm for
XT only. HITACHI offers the following wall mounted accessory, model code 7E512300.
2 PMML0303B rev.1 - 09/2014
Wall mounted support
(Optional)