Topcom RC-6405 Airsoft Edition Manual De Usuario página 6

Twintalker RC-6405
13.7.1 CTCSS
• Press the
CTCSS code flashes on the display.
• Press the
another code.
• Press the
mode.
13.7.2 DCS
• Press the
current DCS code flashes on the display.
• Press the
another code.
• Press the
PTT
mode.
To disable CTCSS or DCS, select code "00" for CTCSS or for DCS in the
menu. When the entry is confirmed, "OF" will be displayed.
13.8 Monitor
You can use the monitor feature to check for weaker signals in the current channel.
• Press the -button 7 and
monitoring.
• Press the -button 7 to stop channel monitoring.
During channel monitoring the receiver circuit in the PMR will not listen to
CTCSS or DCS codes.
13.9 VOX Selection
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will transmit
a signal when it is activated by your voice or other sound around you. VOX operation is not
recommended if you plan to use your radio in a noisy or windy environment.
VOX mode will be overrided when you press the
-button twice : "CTCSS" and the current
7
-button or the -button to change to
11 10
-button to confirm and return to stand-by
12
PTT
-button three times : "DCS" and the
7
-button or the -button to change to
10
11
-button to confirm and return to stand-by
12
-button simultaneously to activate channel
10
- button
PTT 12
13.10 Channel Scan
Channel scan performs searches for active signals in an endless loop from channel 1 to 8.
Once an active channel is found you have the option to search for the CTCSS code or the DCS
code that is set by the user who is broadcasting on the channel.
13.10.1 Scanning for an active radio channel
Once an active channel is found, the scanning will stop and you can listen to the transmission.
When the transmission on the found channel stops, the scanning will resume automatically.
If you press the
PMR will go back in stand-by mode on the found channel.
13.10.2 Scanning for a CTCSS code
When an active channel is found press the
Now you have to option to search for the CTCSS/DCS code that is used by the found user.
.
Once there is a transmission on the channel, the CTCSS code (if used) will be detected and
displayed.
• Press the - button four times, the current VOX
7
setting flashes on the display and the VOX icon is
displayed.
• Press the -button to set the VOX sensitivity level
11
between 1 and 3 (level 3 is the most sensitive level).
• Press the button until 'OFF' appears on the display,
10
to turn VOX OFF.
• Press the - button to confirm and return to stand-by
12
PTT
mode.
• Press the -button five times : "SCAN" and the
7
current channel flashes on the display.
• Press the -button or the -button
11
channel scan.
button while listening to a found channel, the
12
PTT
button to select the found active channel.
PTT 12
• Press the -button 7 six times : "SCAN" and "CTCSS
00" flashes on the display for the selected radio channel.
• Press the -button or the
11
CTCSS scan.
7
to start the
10
-button to start the
10