ClimaCity HYAB-4 Manual De Instrucciones página 27

Emisor térmico de fluido
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10. Avoid the use of an extension cord as this may overheat and
cause a risk of fire.
11. Use the heater in a well-ventilated area. Do not insert or allow
objects to enter any ventilation or exhaust opening. To prevent a
possible fire, do not block air intakes or exhaust openings in any
manner. Do not use on soft surfaces, like a bed, where openings
may become blocked. Use the heater on flat, dry surfaces only.
12. Do not place this heater near flammable materials, surfaces or
substances, as there may be a risk of fire. Keep the above
flammable materials, surfaces or substances at least 1m from the
front of the product and keep them away from the sides and rear.
13. Do not use the heater in any areas where petrol, paint or other
flammable liquids are stored e.g. Garages or workshops as a hot,
arcing or sparking parts inside the heater.
14. Don't use this heater in the immediate surroundings of a bath, a
shower or a swimming pool with floor standing mode. Never locate
the heater where it may fall into bathtub or other water container.
15. Never touch the heater with wet hand. The heater should be
installed so that can not be touched by a person using a bath or
shower.
16. This heater is hot when in use. To avoid burns and personal
injury, do not let bare skin touch hot surfaces.
17. Before moving the heater, please must unplugged it and let it
cool down for 15 minutes. If provided, use handles when moving
the product.
18. Be sure that no other appliances are in use on the same
electrical circuit as your product as an overload can occur.
19. This heater is filled with a precise quantity of special oil.
20. Repair requiring opening of the oil container are only to be
made by the manufacturer or his service agent who should be

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hyab-5Hyab-7Hyab-9Hyab-11

Tabla de contenido