(1) The screen is with back light. It will extinguish after 1 minute
if you didn't press any button. It will light up if you press any
button.
(2) Unit is with button lock function. The buttons will be locked
(
) after 1 minute if you didn't press any button.
Open lock: press
(3) Time will be clean to 00:00 if you unplugged unit or cut off
the power.
(4) This heater includes an overheat protection system that
shuts off the heater when parts of the heater are getting
excessively hot.
will showed only the unit is heating.
(5)
(6) The units will always get into free normal mode from
standby mode;
The unit will return to latest running mode due to
suddenly power off after power come back.
1. Always remove the plug from the socket-outlet and allow the
heater to cool down before clean it.
2. Wipe the exterior surface of the heater occasionally with a soft
damp cloth (not dripping wet) and dry the exterior surface before
operating the heater.
WARNING:
Do not immerse the heater in water.
Do not use any cleaning chemicals such as detergents and
abrasives.
and
MAINTENANCE
Do not allow the interior to get wet as this
at same time.