Uebler F14 Instrucciones De Montaje Y De Uso página 20

lift up the tail light cluster (9).
2. With the cable (44) of the tail lights (9), carefully lift up
the cover (37) and thread it out in the direction of the arrow.
3. Remove the tail lights (9) completely from the holder (36).
38
38
4. Remove the screws (38) and take off the lens (39).
17 40
5. Press the defective bulb (14, 16, 17) gently into the socket (40),
turn it 90° anticlockwise and pull it out.
6. Pull the bulb (15) out of the socket (41).
Note
Making sure you use a clean cloth, pick up the new bulb
and insert it in the socket (40, 41).
7. Press the new bulb (14) slightly into the socket (40) and turn
it 90° clockwise. Required light bulbs, see page 17.
8. Put the lens (39) back in and fasten it hand tight with
the screws (38).
39
15
14 40
16
40
M+P-25A-0221
9
41
9. Push the tail lights (9) into the holder (36) without locking.
10. Place the cable (44) in the cable guide of the holder (36).
11. Thread the long tab of the cover (37) into the wheel rail
and insert the cover (37) completely into the holder (36).
12. Push the tail lights (9) completely into the holder (36) until
the catches (35) audibly engage, then tighten the screws (21).
M+P-25A-0238
- 18 -
21
35
36
37
44
M+P-25A-0240