Philips Lumea BRI945 Manual Del Usuario página 26

26
English
Problem
The results of the
treatment are not
satisfactory.
Warranty and support
Recycling
Technical specifications
Transport and storage
conditions
Operating conditions
Emitted wavelengths
Pulse duration
Flash interval
Possible cause
You have used a light
intensity setting which is
too low for you.
You did not flash an area
adjacent to an area you
treated before.
The device is not effective
on your body hair color.
You do not use the device
as often as recommended.
You respond more slowly to
IPL treatment.
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
-
This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
-
Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative consequences
for the environment and human health.
Lumea remains operational in NORMAL USE within its specification after
transport or storage in the following environmental range:
-25 °C to +70 °C up to 90 % RH, non‑condensing, 700 hPa to 1060 hPa
Lumea complies with its specifications when operated in NORMAL USE under
the following environmental operating conditions:
+5 °C to +35 °C up to 90 % RH, non-condensing, 700 hPa to 1060 hPa
565 to 1400 nm
1 - 2.5 ms, for all settings
Between 1 - 3.5 s depending on battery/mains connected use
Solution
Select a higher setting next time.
You have to release the flashes close to each
other and there should be some overlap between
the flashes.
If you have light blond, grey, red or white hair,
the treatment is not effective.
To remove all hairs successfully, we advise you to
follow the recommended treatment schedule.
You can reduce the time between treatments,
but do not treat more often than once every two
weeks.
Continue using the device for at least 6 months,
as hair regrowth can still decrease over the
course of this period.