Retekess TH011 Manual Del Usuario página 19

2) Device name: Click [ ] next to "Multifunctional Alarm Host/ WIFI Alarm
System" to check the device name or rename the device;
3) Device location: Click [ ] next to "Multifunctional Alarm Host/ WIFI Alarm
System" and find the "Location" setting item. After entering, you can check the
device location or re-confirm the installation location of the device;
4) Device information: You can view virtual ID, IP address, Mac address, device
time zone, signal strength and other information;
5) Offline reminder: A reminder is issued when the device is disconnected for
more than 30 minutes, and a reminder is issued when a low-power device is
disconnected for more than 8 hours;
6) Shared device: Share the device with users who need to view the device;
7) Frequently Asked Questions and Feedback: View solutions to some common
problems and provide feedback on unsolved problems;
8) Add to home screen: Click this option to generate a "desktop shortcut" on
the phone's home interface;
9) Check device network: Click this option to check the connection between
mobile phones and other terminal devices and the WIFI network;
10) Device upgrade: Click this option to check the firmware version of the
device;
11) Remove the device: If you do not need to view the device, you can remove
the device;
3.6.7 "Scene" function operation instructions
1) Click the "Scene" button, then click "Create Smart Scene" on the "Automation"
page to enter scene creation; under the create scene function, users can refer
to the APP options and operate step by step until the creation of the
corresponding scene is completed, for example key execution, weather
changes, changing arming modes, etc.; (Note: This product currently only
supports button calls, other functions such as weather changes, arming modes,
etc. require the purchase of additional accessories)
After the scene setting is completed, you need to name the newly created
scene, click Save, and then exit.
16