Publicidad
Idiomas disponibles
Idiomas disponibles
User manual
b. Configuration menu
Through this menu the address of the unit
can be selected (so that it can be controlled
by the Headend Controller CDC). To be able
to control a headend remotely each device
should have a different address (1 to 254).
It is the responsibility of the installer to make
sure that there are not duplicated CDC
addresses in the control bus.
From this menu you can switch between fre-
quency and channel table mode.
The following channel tables are available:
Table 1: CCIR, New Zealand and Indonesia.
Italian channels.
Table 2: China, Taiwan and CCIR hyper-
band.
Table 3: M/N, Chile.
Table 4: France.
Table 5: Australia.
Table 6: Southafrica, K1 (8MHz), I (Ireland,
8MHz).
Table 7: Former URSS and OIRT.
To carry out a modification the
be pressed until the desired parameter flas-
hes. Then the correspondent parameter can
be modified by pressing
and
c.- Language selection menu
The last extended menu allows the selection
of the menus language (English/Spanish).
By pressing
or
you switch between
different languages.
36
5.3.- PARAMETERS SAVING
Once a parameter is modified to the desired
value in any menu (normal or extended), to
save the settings press
seconds. The display will show the following
indication:
If the configuration paremeters are modified
but not saved the previous configuration is
key must
retrieved after 30 sec. in other words the
changes are discarded.
.
COFDM-QAM
for three
Publicidad
