Publicidad
Idiomas disponibles
Idiomas disponibles
9. START-UP
At the end of the installation, check the continuity of the earth circuit and perform all
electrical safety tests as provided by applicable regulations. Protect and lock cables
properly to prevent accidental cable tractions that may disconnect it from the
connections or that may come in contact with hot parts at temperatures above 50°C or
with sharp parts. If the power cord is damaged, it must be replaced by the manufacturer
or its service technician or, in any case, by a person with similar qualifications, in order to
prevent any risk.
•
Make sure that all packing materials have been removed.
•
Test all pipes to ensure there is no leakage.
•
Check all electrical connections.
•
Check whether the drawer can be removed from the appliance.
•
Verify that the door can be closed properly.
It's possible manage the fridge compartment as desired by
moving storage shelves and door shelves. The drawer in the
models where it is provided is specially designed for bottles,
cans and vegetables. To divide the drawer into compartments
there is a bottle retainer that can be placed at various
distances. The maximum storage capacity of the drawer is 20
Kg. After a minimum of 4 hours of cooling the food can be put
in the refrigerator.
To prevent excessive ice formation in the refrigerator,
always cover liquid products, let warm products cool down before placing them
in the regrigerator. Do not open the door or drawer any longer than necessary.
To reduce the cooling time, store only pre-cooled food in the refrigerator. To
prevent the food form drying out or your refrigerator from smells, store food
separately in closed box.
Control panel
1
2
1
On / Stand by
2
Night Mode
3
Turbo Mode
3
4
Cooling level indicators
5
Cooling level buttons
4
5
ENG
25
Publicidad
