ICC 80012 Manual De Instrucciones página 15

MANUAL DE INSTRUCCIONES

SEL change to yellow
color when programm is
selected
PROGRAMM 04
TEMP: 50.0ºC TIEMPO: 00:00
UNDERTEMP: 0ºC OVERTEMP: 0ºC
HOME
SETUP
Fig 7.4. selecting a programm
ºC
28.9
50.0
SET
Fig 7.5. Operation screen
Fig 7.6.1 INTERNAL circulation.
Fig 7.6.2 EXTERNAL circulation.
J
.P. SELECTA s.a.
CODIGO 80301 REV 0
7.4 Selecting a programm for operation
To select an stored programm press over SEL
( SEL indication, change its color to yellow)

SEL
Once selected, this programm in placed on the WORKING screen.
SAVE
HH:MM:SS DD/MM/YY
7.5 Operation screen.
On the operation screen «TASK», the programm selected on the
programming screen is shown (See 7.4) it start on press pulsando
sobre
PROG 04
SET - - h -- m
This screen shows:
T 00 h 00m
Actual temperature,
F L O W
Temperature set.
80%
Working time set. (SET)
Elapsed time.
HH:MM:SS DD/MM/YY
7.6 Circulation pump
The liquid circulation pump could operate in two configuration modes:
- INTERNAL circulation:
Water (or other) will be pumped from horizontal pump output.
(See fig 7.6.1).
Use this configuration to made water circulation into the bath vessel in
order to homogenize the temperature from sample load.
- EXTERNAL circulation:
Water (or other) will be pumped from horizontal pump output.
(See fig 7.6.2).
Use this configuration to made water circulation out of the bath vessel
in order to temperate an external equipement.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
Feb/2015 (Sujetas a modificaciones sin previo aviso)
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 15