Publicidad
Idiomas disponibles
Idiomas disponibles
• Donotblock airopenings o r
place aircleaner on
soft surface
such as bed or sofa.This could
cause air cleaner to tip over,
blocking
air intake opening.
• Place air cleaner on a flat, level
surface at least 6 inches away
from heat sources such as
ranges or heaters.
• This product is intended
for
indoor use only.
NOTE: Before operating
air cleaner, record date of installation
on HEPA filter so you
can replace it annually.To
remove and replace HEPA filter, see instructions
on Page 7.
LOW
__
_
HEPA..Filter Light
.
_\
.
)_\
Pre-Filter Light
CHANGE
HEPA
..-"'
CHANGE
C_""
PRE-FILTER
HIGH
1. Plug air cleaner into a grounded
3-prong
outlet.
Note: Both filter lights will flash once
during a self-test when the air cleaner
is turned on or after a power
interruption.
2. Turn the knob clockwise to HIGH, MED
or LOW to select the speed you want.
:3. When the HEPA filter or pre-filter
light
comes on, open the front grill and
replace the indicated
filter. See
"Caring for Air Cleaner',' Pages 6-7.
4. Whenever
you change either filter,
press the "Reset" button.
Publicidad
