Kenmore 83230 Manual Del Propietário página 7

Filter B eplacement
Indicator lights on top of air cleaner
will light up when it is time to replace
either the pre-filter or the HEPA filter.
1. Place fingers on front release tabs.
Gently push tabs in and pull front
grill forward to remove it.
2. Remove and replace the indicated
filter. Install the new HEPA filter in the
same direction shown by the arrow
located on the filter frame. Install the
new pre-filter by placing it on the
tabs. DO NOT try to wash and reuse
either the HEPA filter or the pre-filter.
" Bottom Slots
:3. Place bottom tabs on front grill into
slots in base of air cleaner. Push top of
grill forward until grill locks in place.
4. Push the"Reset" button to turn off
light(s) and reset timer.
For most efficient operation of the air
cleaner, it is recommended that you
replace the pre-filter every three
months and the HEPA filter every year.
To order replacement pre-filters or
HEPA filters:
Call 1-800-366-PART (1-800-366-7278)
6 am -11 pm CT, 7 days a week or
through web site
www.sea rs.com/pa rtsdirect
AirCleaner
Model No.
83230
83234
83353
83354
83355
HEPA Filter
Replacement
Part No.
83376
83374
83374
83375
83376
Pre-filter
Replacement
Part No.
83378
83377
83377
83378
83378