Descargar Imprimir esta página

LG STEAM WASHER WM3001H A Serie Guía Del Usuario E Instrucciones De Instalacion página 21

Ocultar thumbs Ver también para STEAM WASHER WM3001H A Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

0
TO USE
OPERATING THE WASHER
Once you have loaded the washer and added
laundry products (detergent, bleach, and/or
fabric softener):
O
Press the ON/OFF button to turn on the
washer. The lights around the cycle
selector knob will illuminate.
O
Turn the cycle selector knob to the desired
cycle. The display will show the
preset Rinse/Wash Temperature,
Spin Speed, Soil Level, and
Option settings for that cycle.
Oil
you would like to change the settings
for that cycle, press the option button(s)
to display additional settings for that option.
Press the button again to cycle through
the settings until the desired setting is
shown.
NOTE: To protect your garments, not every
wash/rinse temperature,
spin speed, soil
level, or option is available with every cycle.
Select any additional cycle options, such as
STEAM or DELAY WASH by pressing the
button for that option, or by pressing the
OPTION button for additional options.
O
Press the START/PAUSE button to begin
the cycle. The door will latch,
the display will change, and
the washer will calculate the
estimated time remaining. Once
the washer has calculated the estimated
total cycle time, the washer will start. To
pause the cycle at any time, press PAUSE.
NOTE: The cycle time displayed may
appear much longer than that of a top-
loading washer. The displayed time is for the
complete cycle, rather than just the agitation
portion of the cycle, as is typically shown on
a top-loading
washer.
NOTE: if the temperature
in the washer is
too high, the door cannot be unlocked until
the washer has cooled. If the water level is
too high, select the DRAIN & SPIN cycle to
drain excess water. Do not try to force the
door open.
Washing time can be reduced significantly
for small or lightly soiled loads by selecting
the Speed Wash cycle and setting the Soil
Level button to Light.
O
When the load is finished, the beeper (if set)
will sound and the door will unlock.
Remove damp clothes from the washer
immediately. Check under the door seal
for small items.
NOTE: To protect your garments, not every
wash/rinse temperature,
spin speed, soil
level, or option is available with every cycle.
21

Publicidad

loading