CHAPTER -3: USING YOUR FREEZER
Control panel
Freezer temperature
set button
Freezer partition temperature setting button
This button allows setting temperature of the freezer. In order to set values for freezer partition, press this button. Use
this button also to activate SF mode.
Alarm light
In case of a problem within the freezer, the alarm led will release red light
Super freezer mode
When would it be used?
• To freeze huge quantities of food.
• To freeze fast food.
• To freeze food quickly.
• To store seasonal food for a long time.
How to use?
• Press temperature set button until super freezing light comes on.
• Super freezing led will light during this mode.
• Maximum amount of fresh food (in kilograms) to be frozen within 24 hours is shown on the appliance label.
• For optimal appliance performance in maximum freezer capacity, set the appliance to active SF mode 24
hours before you put the fresh food into the freezer.
During this mode:
If you press temperature set button, the mode will be cancelled and the setting will be restored from -16.
Freezer temperature settings
• The initial temperature of the Setting Display is -18°C.
• Press freezer setting button once.
• Every time you press the button, the setting temperature will decrease. (-16°C, -18°C, -20°C,.. super freezing)
• If you press freezer setting button until super freezer symbol is displayed on Freezer
- Settings Display and you do not press any button within the following 3 seconds,
- Super Freezing will blink.
• If you keep on pressing, it will restart from last value.
Warnings for temperature settings
• The ambient temperature, temperature of the freshly stored food and how often the door is opened, affects the
temperature in the freezer. If required,change the temperature setting.
• It is not recommended that you operate your freezer in environments colder than 10°C .
• The temperature setting should be set by taking into consideration how often the freezer door is opened and
closed, how much food is stored in the freezer and the environment in which and the positioning of the appliance.
• We recommend that when first using the freezer it should be left running for 24 hours uninterrupted to ensure
it is completely cooled. Do not open the freezer door, or put food inside for this period.
• Your freezer has a 5 minute built in delay function, designed to prevent damage to the compressor. When power
is applied to your freezer, it will begin to operate normally after 5 minutes.
• Your freezer is designed to operate in the ambient temperature intervals stated in the standards, according
to the climate class stated in the information label. It is not recommended that your freezer is operated in
Symbol of
Super Freezing Mode
alarm indicator led
Freezer adjusted
temperature indicator
EN -6-