Genie CB 850 Instrucciones De Uso página 14

Note:
You can subsequently add or remove sheets by opening and then closing
the binding spine as described.
Punch holes
Cleaning and removing blockages
Emptying the collection tray
 Pull out the collection tray for perforated waste after use, empty it and push it
back in fully.
You should be able to feel it click into place.
Removing blockages
If the lever can no longer be lifted up when perforating, proceed as follows:
1. Secure the lever with the locking catch.
2. Pull out the collection tray and turn over the device.
6. Move the lever slowly downwards.
Take care that the paper does not slip
from the tips.
The binding spine closes around the
paper.
7. Lift the binding spine with the paper
from the comb.
1. Place the blades in the rear slot of the
unit as shown and push the lever forward.
14