Publicidad
Idiomas disponibles
Idiomas disponibles
Using the appliance
The air fryer can prepare a large range of ingredients.
Hot air frying
1、 Put the mains plug in an earthed wall socket.
2、 Carefully pull the pan out of the air fryer.(Fig.4)
3、 Put the ingredients in the basket.(Fig.5)
Note: Never fill the basket beyond the MAX indication or exceed the amount indicated in
the table(see section 'Settings' in this chapter),as this could affect the quality of the end
result.
Make sure you check the preparation time and the temperature required for the different
ingredients before you start to prepare them simultaneously. Potato cubes and schnitzel,
for example, can be prepared simultaneously because they require the same settings.
Please note that the maximum amount for each of the ingredients is half the normal
amount.
4、 Slide the pan back into the air fryer. (Fig.6)
Never use the pan without the basket in it.
Caution: Do not touch the pan during and sometime after use, as it gets very hot. Only
hold the pan by the handle.
5. Operate the control panel as follows(Fig 7)
Plug in the power, the whole power indicator light. （Button "1"）
Button 1 –Power Button
Once the Basket and Grill are properly placed in the main Unit housing, the Power Button
will be illuminated. Selecting the power button for 2 seconds will make the unit's default
temperature 180, while the cooking time will be set to 15 minutes. Selecting the Power
Button a second time will start the cooking process. Pressing the power button for 2
seconds to close the entire device during cooking. All the lights go out, the fan stops
working. Note: During cooking, you can touch the button to control the pause and start of
cooking.
Button 2 –Preset Button
Selecting the Preset Button enables you to scroll through the 8 popular food choices. Once
selected, the predetermined time and cooking temperature function begins.
Button 3 –Temperature time switch button
Touch this button, the screen alternately flashes the temperature and time, and the
corresponding temperature and time indicator light is lit, and the time and temperature
are set according to the "3" key and "4" key.
Button 4&5 – "-" and "+" Control Buttons
When the temperature of the scintillation screen and corresponding indicator, press "4"
and "5"keys in turn set, temperature control range is 80°C to 200°C.
12
Publicidad
