INSTALLATION INSTRUCTIONS
DANGER
To reduce risk of death by electric shock, do not install
recharger where unit can fall into a tub or sink.
How to use the wall mount
The recharger can be hung on the wall using wood screws.
1. Select an appropriate location on the wall where the screws can go in.
Install only where recharger cannot reach tub, sink, or shower.
2. Attach the wall mount to the wall as shown in the figure below, with the
wood screws, making sure that the arrow points up.
3. Slide the recharger grooves into the wall mount until it clicks in as shown
in the figure below.
To remove the recharger from the wall mount, slide the recharger upward.
Caution
When taking the main body out of the recharger, make
sure to lift it straight up to avoid detaching the recharger
form the wail mount and causing injury.
Precaución Cuando retire la unidad principal del cargador, asegúrese de
levantarla derecha y con cuidado para evilar que el cargador
se desprenda del montaje mural y se produzcan daños.