Description; Insert Tools And Accessories - Hilti TE 6-S Manual De Instrucciones

2. Description

Use of the tool as intended
The TE 6-S rotary hammer drills with selectable pneu-
matic hammering mechanism are electrically-powered
tools for drilling in concrete, masonry, plasterboard (dry-
wall), wood, plastics and metal.
en The working environment may be on a construction
site or in a workshop and the tool may be used for ren-
ovation, conversion or new building work.
The tool may be operated only when connected to a
power supply providing a voltage and frequency in com-
pliance with the information given on its rating plate.
Changes or modifications to the tool are not permis-
sible.
To avoid the risk of injury, use only original Hilti acces-
sories and additional equipment. Observe the infor-
mation printed in the operating instructions concern-
ing operation, care and maintenance.
Requirements to be met by users
● The tool is intended for professional use.
● The tool may be operated, serviced and repaired only
by authorised, trained personnel. This personnel must
be informed of any special hazards that may be encoun-
tered.
● The tool and its ancillary equipment may present
hazards when used incorrectly by untrained person-
nel or when used not as directed.
● Always concentrate on the job you are doing. Proceed
carefully and do not use the tool if your full attention is
not on the job.

3. Insert tools and accessories

TE-C chuck
TE-C angular chuck
TE-AC 1 angular chuck
Hammer drill bits
Bit holder
Thin-barrel core bits
Keyless chuck (quick release)
Drill bits for wood
Drill bits for metal
Stepped (stop) drill bits
Hole saws
DRS dust removal module
14
Printed: 07.07.2013 | Doc-Nr: PUB / 5071102 / 000 / 00
Chuck
– with rotary locking action
– Interface for TE-C chuck and keyless chuck
Switches
– Speed-control switch
– Function selection switch
TE6-S: 3 drilling functions
– Reversing switch (switch for forwards/reverse rota-
tion)
Side handle
– Privoting side handle with depth gauge
Lubrication
– The gearing section and hammering mechanism fea-
ture permanent grease lubrication.
The items supplied as standard equipment include:
– Rotary hammer drill
– Privoting side handle with depth gauge
– Grease
– Operating instructions
– Toolbox
– DRS dust-removal module (with version in the pro-
fessional toolbox)
– Cleaning cloth
TE 6-S
●
●
●
4–24 mm dia.
●
25–68 mm dia.
●
5–20 mm dia.
5–13 mm dia.
5–22 mm dia.
25–68 mm dia.
●