Publicidad
Idiomas disponibles
Idiomas disponibles
PW-150
PW-150
V5.1
V5.1
upon pressing any key the respective function will execute normally and the equipment
will return to normal energy consumption mode.
Total Shut Down (TSD)
If the incoming voltage drops below 11 VDC, after 60 seconds the equipment will
automatically shut down any function and auxiliary load. While on TSD, upon pressing any
key the backlights will blink 3 times and the function controlled by the pressed key will not
execute.
Once the equipment detects that the incoming voltage exceeds 12.5VDC again, the
equipment will return to its normal operation.
HAND MICROPHONE (OPTIONAL)
The microphone has 3 buttons to control public address and siren functions.
Siren - HORN tone
Siren - SIREN 2 tone
Setting up SIREN 2 tone
SIREN 2 function allows to choose among 5 different tones (WAIL, Hi-Lo, PHASER, CHIRP,
and YELP). The selection of a SIREN 2 tone is independent from the other sirens, so that
changing tones for SIREN or AUX SIREN will not affect SIREN 2. To set up the SIREN 2 tone,
follow the procedure described below.
1. Press and hold SIREN 2, this will change the tone to the next option.
2. Release SIREN 2 to save the heard confi guration.
PTT
SIREN 2
ON: press & hold
OFF: release
Activates the
reproduction of the
HORN tone.
ON: press & release
OFF: press & release
Activates the
reproduction of the tone
selected for SIREN 2.
HORN
Public address - PTT
ON: press & hold
OFF: release
Allows the driver to
communicate to the
exterior through the
hand microphone.
8
8
Publicidad
