Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Step 2
Attach the anchoring arms (GG) onto the base of the
BB
tank housing (F) using 6 M6 x 12 screws (BB) and 6 M6
nuts (CC)�
CC
GG
F
Step 3
Flip over the tank housing (F) so that it is right-side
up� Attach the belt (L) to the tank housing (F) using 1
M5X12 screw (DD) and 1 M5 nut (EE)�
F
L
DD
EE
Step 4
Align the holes at the bottom of the burner (E) to the
top of the tank housing (F)� Make sure to position it so
that the control panel on the burner (E) is aligned with
E
the door on the tank housing (F)� Insert 4 M5X12 screws
(DD) through the aligned screw holes and secure with 4
M5 nuts (EE)� Tighten with the included wrench (HH)�
DD
EE
F
10
Publicidad
