Publicidad
Idiomas disponibles
Idiomas disponibles
COd. 94522 - TSP 51/16N
• Protection against electric shocks. While using the appliance, avoid contact with objects
placed on the ground, such as pipes, thermosiphons, ovens and other household electrical
goods with a power cable, and wear shoes with insulating, dry soles.
do not use the hedge trimmer in the rain
• Consider maximum acoustic pressure (noise). Wear a protective head-set to safeguard
you against the machine's noise during work, if the noise exceed 85 dB(A).
• Always remove the power plug from the socket outlet before you perform any work on the
hedge trimmer, e.g.:
Repairing a damaged cable
Cleaning the blades
Troubleshooting
Cleaning and maintenance or before leaving the tool unattended
• Always handle the hedge trimmer with both hands.
• Never work with the hedge trimmer in the rain or on wet hedges and never leave the
hedge trimmer outdoors. The hedge trimmer must not be used if it is wet.
• We recommend that you wear safety goggles and ear-muffs when working with the
hedge trimmer.
• Carry the hedge trimmer only by its guide handle.
• Keep cables clear of where you are cutting.
• Use the hedge trimmer only when the power cable is in good working order.
• If the blades become jammed, e.g. due to thick branches or the like switch off and unplug
the hedge trimmer immediately. Only the are you to remove the cause of the obstruction
• During transportation and storage of the hedge trimmer, keep the blades covered at all
times with the special guard.
• Take care not to overload the hedge trimmer and do not use it on jobs for which it is not
intended, i.e., you are allowed to use the hedge trimmer only to cut hedges, shrubs.
OPERATING RANGE
This hedge trimmer is designed to cut hedges, bushes and shrubs. Any other use which is not
expressly permitted in these instructions may cause damage to the hedge trimmer and
place the user at serious risk.
BEFORE OPERATION
Unpacking
1. Take all parts out of the packaging.
2. Check all parts for transportation damages. If you detect any damages or if parts are
missing, please contact your dealer.
Attention ! Always pull the plug and switch the device OFF, before you
assemble the device or replace parts.
Assembly
Mount the supplied hand guard and fasten it with the supplied screws.
- 15 -
Publicidad
