EVVO Ai 25 Manual De Instrucciones página 20

ENGLISH
BOX CONTENTS
Non Stop vacuum cleaner 2 in 1 accessory
Corner accessories
Multifunctional brush
Rigid vacuuming tube
Wall bracket
Power adapter
Extensible tube
lnstruction manual
3. PRODUCT ASSEMBLY
VACUUMING TUBE AND BRUSH HEAD ASSEMBLY
To install the vacuuming brush head into the vacuuming tube, align both making
To disassemble them, press the vacuuming-brush-headrelease button, and pull from
the vacuuming tube while you hold the vacuuming brush head.
When assembling these 2 parts, make sure the handle and the brush are facing the
same direction.
VACUUMING TUBE, VACUUMING BRUSH HEAD, AND MAIN BODY ASSEMBLY.
FIG. 2
To complete the vacuum cleaner's installation, once the vacuuming brush head is
mounted on the vacuuming tube, hold the tube vertically and insert it into the main
body.
ASSEMBLING THE BATTERY. FIG. 3
Introduce the battery in the slot located in the main body following the guides. Once it
is introduced, it will click into place. Once inserted, check that it is secured in position.
To disassemble the battery, press the release button and remove the battery.
Remove the battery and store it in a safe, dry place if the device is not going to be used
in a long period of time.
20
EVVO ASPIRADOR VERTICAL SIN CABLES AI25