EVVO Ai 25 Manual De Instrucciones página 22

ENGLISH
it, inserting its charging terminals into the bracket's.
4. Once the wall bracket is installed, connect the power adapter to the charging port,
and then you can charge the vacuum cleaner by simply sliding it up and down the
wall bracket.
CHARGE AND DISPLAY
The battery must be charged with the wall bracket while it is connected to the main
body. Connect one of the ends of the power adapter to the power supply and the
other to the charging base.
indicator will rema in steady.
You can also charge the battery without using the wall bracket. You can charge
the battery when the battery is installed ar not in the vacuum cleaner. Connect the
adapter and connect the other end to the battery, paying attention to the direction.
charging is complete.
5. CLEANING AND MAINTENANCE
- Always turn off and unplug the vacuum cleaner befare cleaning ar maintenance.
- Use a soft, slightly dampened cloth to clean the device's surface.
- Never immerse the device in water ar other liquids. Do not allow liquids to enterthe
device.
- Do not use abrasive cleaners ar scouring pads to clean the product.
- Do not leave the vacuum cleaner in a place with direct sunlight.
-Do not leave the vacuum cleaner in a wet place after cleaning it.
- After the brush has been used far a long time, bristles might start to tangle with hair
and other particles. Clean it far it to operate correctly again.
FILTERS AND TANK CLEANING
To prevent the appliance from overheating and losing suction power, it is suggested
22
EVVO ASPIRADOR VERTICAL SIN CABLES AI25