Kärcher WV 1 Plus Manual Del Usuario página 10

Finishing operation
1. Switch off the device.
2. Clean the waste water tank (see
chapter Cleaning the waste water
tank).
3. Clean the microfiber wipe cover (see
chapter Cleaning the microfiber
wipe cover).
4. Clean the squeegee blade and suc-
tion nozzle (see chapter Cleaning
the squeegee blade and suction
nozzle).
5. Allow the device to dry.
6. Assemble the device.
7. Charge the battery if necessary (see
chapter Battery charging).
Transport
WARNING
Risk of injury, risk of damage!
Be aware of the weight of the device
during transportation.
Stow or secure the device in accor-
dance with the applicable guidelines so
that it does not slide or jostle around
during transport.
1. Stow or secure the device so that it
does not slide or jostle around in the
vehicle when accelerating, braking,
cornering or in the event of an acci-
dent.
Storage
1. Store the cleaned device upright in a
clean, dry place that is protected
from dust.
10
Care and service
WARNING
Incorrect cleaning
Risk of fire, injury, electric shock
Switch off the device.
Pull the connecting plug out of the
charging socket.
Never clean the device under running
water.
Cleaning the waste water tank
1. Empty the waste water tank (see
chapter Emptying the waste water
tank).
2. Clean the waste water tank and the
cap by hand.
3. Put the cap back on the waste water
tank.
4. Insert the waste water tank into the
device.
Cleaning the squeegee blade
and suction nozzle
1. Switch off the device.
2. Remove the suction nozzle.
a Press a screwdriver into the un-
locking opening of the suction
nozzle.
b Slowly pull the suction nozzle from
the separator.
English