Sony VLP-PHZ50 Guía De Configuración página 46

Step 3
Turning the Projector On/Off
1
Plug the AC power cord into a wall outlet.
2
Turn on the projector.
Press the / key on the unit or the Remote
Commander.
Turning Off the Power
1
Press the / key on the unit or the Remote
Commander.
The projector starts shutdown and turns off.
For long-term use, turn off the projector when
not in use.
2
Unplug the AC power cord from the wall
outlet.
Selecting the Menu Language
The factory setting for the language for displaying
menus, messages, etc. is English.
To change the on-screen language, proceed as
follows:
1
Plug the AC power cord into a wall outlet.
2
Turn on the projector.
Press the / key on the unit or the Remote
Commander.
3
Press the MENU key to display the menu.
If the display cannot be properly seen, adjust
the focus, size, and position of the projected
image (page 47).
4
Select the menu language.
 Press the  or  key to select the Operation
( ) menu then press the ENTER key.
46
GB
Projecting
Projecting
 Press the  or  key to select "Language
( )" then press the ENTER key.
 Press the /// key to select a
language, then press the ENTER key.
5
Press the MENU key to turn off the menu
screen.