Comelit VEDO5TPR Manual Tecnico página 8

WARNING
• Install the equipment by carefully following the instructions given by the
manufacturer and in compliance with the standards in force.
• All the equipment must only be used for the purpose it was designed for.
Comelit Group S.p.A. declines any responsibility for improper use of the
apparatus, for any alterations made by others for any reason or for the use of
non-original accessories or materials.
• Installation, mounting and assistance procedures for electrical devices must only
be performed by specialised electricians.
• For standard-compliant installation, a suitable (two-pole) device must be
provided for isolating and protecting the mains power supply in the building's
electrical system (see figure), in compliance with current standards (law 46/90):
for example, a two-pole overload circuit breaker with rated current 6A.
Two-pole isolating device
example:
Control
Panel
Wiring diagram: two-pole mains switch (for
example overload circuit breaker with rated
current 6A) able to isolate the power supply of
the device.
MAINTENANCE
• Disconnect the power supply before carrying out any maintenance
procedures.
• It is recommended to check the correct operation of the safety system
periodically (at least once a month) as indicated in the system technical
manual.
CERTIFICATIONS
• All the products comply with the requirements of Directive 2006/95/EC
(which replaced Directive 73/23/EEC and subsequent amendments), as
certified by the CE mark they carry.
PRODUCT LABELS
• All items have a product ID label. An example is provided below:
item
code
item
code
8
VEDO5TPR
000P1515XXXXXXXX
VEDO5TPR
000P1515XXXXXXXX
Ground
Neutral
Line
230 V
50 Hz
EAN code
identifying the
product
serial number
serial number