Saurium YR-BC430 Manual Del Usuario página 59

(F1)
– MOTOR AND SHAFT
Using the four included screws, attach the engine of the brush cutter to
the shaft (F1). Install the protective guard on to the shaft using the
supplied screws and nuts
(1) Fuel tank
(2) Clamping bolt from transmission hub to engine
(3) Transmission Hub
(4) Transmission Shaft
- H
ANDLE
Install the handle into the mount (see F2). The handle can be moved along the shaft. In
this way, everybody can select the ideal comfortable working position. After selecting
the ideal working position, tighten the screws. (F2)
ASSEMBLY
(1) Handle Support
(2) Right Handle
(3) Screws
(4) Left Handle
(5) Engine Side
(F3)
– NYLON WIRE / DISC COVER PROTECTION
Attach the wire / disc coil guard to the bracket
with 4 screws.
(1) Support
(2) Protection