Marmitek CONNECT 540 Modo De Empleo página 4

ADVANTAGES
• For connecting gaming computers such as PlayStations and Xbox, Blu-ray Players,
satellite receivers and all other HDMI devices.
• Built-in HDMI Matrix Switcher makes it possible to independently watch different
HDMI sources on two screens (HDTV or HD projector).
• Suitable for Full HD 1080p and all 3D formats.
• With built-in repeater and equalizer for correcting any signal loss, allowing you to
connect up to 15 metres of HDMI cable to the output.
• No interruptions because solid metal, interference-free, top quality housing is used.
• HDMI certified by ATC (Authorized Test Centers).
• Meets HDCP norms (High-bandwidth Digital Content Protection).
HDMI v1.3 PROPERTIES
• Video bandwidth 225 MHz (enables image to be provided in 1080p, 12-bit and 60Hz)
• 3D (suitable for use with your own 3D equipment).
• Deep Color 36-bit (billions instead of millions of colours, better reproduction of
subtle gradation variances and higher contrasts).
• Dolby TrueHD & DTS HD Master Audio (high quality audio support).
• Lip-Sync (prevents synchronisation problems between image and sound).
• CEC (operate numerous CEC devices with one remote control).
INSTALLATION
HD SET TOP BOX
BLU-RAY / DVD
SATELLITE / DECODER
PC / MOVIE BOX
1. Connect the HDMI sources to the 'input' on the Connect 540™ via HDMI cables.
2. Connect the HDMI screens (HDTV or HD projector) to the Connect 540™'s 'output'
via HDMI cables.
3. Connect the power adapter to the Connect 540™ and plug into the socket.
4. Pull the plastic strip from the battery compartment of the remote control to activate
the battery and use the remote control.
Tip for installation:
Only use High Speed HDMI® certified cables for the best picture and sound quality.
Do not use much force to connect or disconnect the HDMI cables otherwise they may
become damaged.
4
HD TV
or
3D TV
HD TV
or
3D TV
© MARMITEK