Steiner Thermal Handheld Manual De Instrucciones página 25

EN
Power saving settings
• Auto Stand-By - If there is no operation during the preset
time, the unit enters Stand-by mode. If the work indicator
is on before entering Standby mode, the work indicator will
flash in Stand-by mode
• Auto Power - If there is no operation during the preset time,
the unit will power off automatically
NOTE: Auto Stand-by and Auto power-off cannot be per-
formed while WiFi is connected
Indication settings
• Charging indication - In the charging state, you can turn the
charging indicator on or off
• Working indication - In the normal working state, you can turn
the working indicator on or off
General settings
• Time style - Select 12-hour or 24-hour style
• Date style - Choose different date styles according to your
preference
• Time setup - Adjust the current date and time
Watermark Settings
• Users can choose the display style of any watermark on the
screen
48
Language Settings
• Language choices include German / English / Italian / French
/ Spanish
Memory Card Formatting
• Allows the user to format and empty onboard storage
Restore Default
• This function restores the factory settings
Charging
When using the thermal imager for the first time, use the USB
charger to charge the internal battery for at least four hours.
When charging, insert the matching Type C USB charging cable
and plug into power.
• Spezifikationen für das Laden: 5V, 2A.
• Charging indicator is red during normal charging.
• Charging indicator is green when charging is complete.
• Do not charge the battery in an environment over 40˚C or
104˚ F.
NOTE - Charging when the thermal imager is being used
does not charge the battery. This icon indicates the unit
is using the external power for normal operations.
This icon indicates that the external power supply is
charging the battery.
EN
49