INVENTOR KRM-10L Manual Del Propietário página 15

Installation tips
3) Place the unit away from
clothes dryer, heater or
radiator
4) Ensure the filter is clean.
5) Place unit in vertical
operating position and
allow 2 hours before
initial use in order to avoid
malfunctions.
EN
1) Do not block or restrict
the airflow around the
unit. Make sure the air
inlet exhaust grills are not
obstructed. Allow 20cm
of clearance around the
unit and 40cm above.
2) Place the unit in an area
where the temperature
levels will not fall bellow 5ºC
(41ºF) There is a possibility
the coils will collect frost
at temperatures that are
under 5ºC (41ºF), which may
result in low performance.
(Working conditions:
5°C-32°C, 30%RH–80%RH).
6) Before the initial operation, please check,
if the water level switch, located within the
water bucket area, is in the right position.
7) Do not connect the dehumidifier to a
multiple socket outlet, which is also being
used for other electrical appliances.
15