Using The Optional Accessories - Hitachi M 12V Manual De Instrucciones

Router feed
workpiece
Rotation of bit
Fig. 18

USING THE OPTIONAL ACCESSORIES

Fig. 19
Fig. 20
Fig. 21
(2) The bit rotates clockwise (arrow direction
Router feed
1. Model M12V(S), M12SA(S)
(1) Trimmer Guide
2. Model M8V(S), M8(S)
(1) Trimmer Guide:
indicated on the base). To obtain maximum
cutting effectiveness, feed the router in
conformance with the feed directions shown in
Fig. 18.
Use the trimmer guide for chamfering.
As shown in Fig. 19 use the wing bolt to mount
and secure the trimmer guide on the bar holder.
Use the two wing bolts to align the trimmer
guide in the desired position, and use it as shown
in Fig. 20.
Use the trimmer guide for trimming, chamfering
or working the inner surface. Attach the trimmer
guide to the base as shown in Fig. 21.
After aligning the roller to the appropriate
position, tighten the two wing bolts (A) and the
other wing bolt (C). Use as shown in Fig. 22.
Fig. 22
English
19