Publicidad
Idiomas disponibles
Idiomas disponibles
5. If you have a cuvette with four clear sides, place it in
the colorimeter sensor.
If you have a cuvette with two opaque sides:
a. Determine which sides of the cuvette are clear
and which sides have an opaque finish.
b. The clear opposing sides must be positioned
facing the front and back of the sensor (they
won't fit the other way) while the glossy sides face
either side.
c. If the cuvette does not fit with a gentle push,
rotate 90° in either direction and try again.
6. After experimentation, empty your samples, gently
rinse out the cuvettes with distilled water and let
them air-dry.
V2018.01
20
Home
English
Publicidad
