Eldom Saatin SE20 Manual Del Usuario página 9

GENERAL DESCRIPTION
1. Housing
2. LCD
3. Increase temperature (+)
4. Decrease temperature (-)
5. On/off switch
6. Straightening and brushing
piece
TECHNICAL DATA
- power: 70W
- supply voltage: 230V ~50Hz
DESCRIPTION
The electric hair brush is used for straightening and combing hair. The brush gives shine and
smoothness to puffy or curly hair. The housing (1) of the brush is made of material resistant
to high temperatures and the pins have anti-burning tips. By choosing the appropriate
temperature, one can use the brush with thin, normal and thick or curly hair.
CAUTION!
Do not use the brush for artificial hair or for grooming animals. Do not keep the brush
in the same spot for longer than 20 seconds.
Before using the brush, wash the hair and comb it thoroughly.
For best results, do not brush too much hair at once.
OPERATION
To switch on the appliance, press and hold the (5) button for approximately 2 seconds, then
select the appropriate temperature depending on the type of hair. The temperature can
be adjusted in steps of 5
temperature (4). The default temperature is 180
- fragile/thin/dyed hair – 170-190
of hair straightening)
- normal hair 200-210
- dense/thick/curly hair 210-230
When hair straightening is completed, switch off the appliance by pressing the (5) button
and holding it for about 2s, then disconnect the appliance from the mains by pulling the
INSTRUCTION MANUAL
C by pressing (+) and (-) – increase temperature (3) and decrease
o
C (selecting low temperature may increase the duration
o
C
o
C
o
ELECTRIC HAIR BRUSH SE20
1
6
C
o
EN
2
3
4
5
•
EN 9