Set-Up Module - Detailed Access; Menu Access; Selecting Imprint - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790 / MP
3. Set-up Module – Detailed access
The Setup-Module has two sub-sections.
"SETUP - MODULE UPDATE" can only be used in combination with the optionally available
PCset 790 or PCset EASY 790.
"SETUP - MODULE SETTINGS" further extensive settings that influence the imprint and
handling can be carried out.

3.1 Menu access

Press [MODE] until [SETUP] appears in the menu line.

Press [SETUP].

"SETUP - MODULE SETTINGS" appears.
Press [CALL].

"SM - SETTINGS" appears.

3.2 Selecting imprint

Proceed as in Menu access (see page 37).
Press [NEXT] until "STAMP PICTURE" appears.

To set the required imprint number, press [VARY].

To increase the number value, press [INC].

To decrease the number value, press [DEC].

To move directly to the next menu item,

press [RETURN] once.
– or –
To save changes and to return to the main menu,

press [RETURN] three times.
The main menu appears.
56